Construction

V50 SCRAP GRAPPLE

Two-cylinder independent grapple with 1/4” Grade 50 solid bottom scoops up bulky material.

  • Two 1/2ˮ thick vertical braces inside bucket for added strength.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • 3/4″ x 6″ weld-on cutting edge with holes to accept optional edges.
  • Machine specific hydraulic package to completely protect hose routing.
  • V60 Scrap Grapple also available.

 


 

V60 SCRAP GRAPPLE

Two-cylinder independent grapple with 1/4” Grade 50 solid bottom scoops up bulky material.

  • Four 1/2ˮ thick vertical braces and a welded brace plate inside the bucket for added strength.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • 3/4” x 6” weld-on cutting edge with holes to accept optional edges.
  • Machine specific hydraulic package to completely protect hose routing.

 


 

V60 SKELETON ROCK GRAPPLE

Two-cylinder independent grapple with 4” tine spacing designed to pick rocks and debris and leave dirt behind.

  • Every tine is constructed from one piece of 1/2ˮ Grade 80 steel, from tip to top brace, to add rigidity.
  • Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • Machine specific hydraulic package to protect hose routing.

 


 

V50 SKELETON TINE GRAPPLE

Two-cylinder independent grapple that reaches tine tips for fine work.

  • Every tine is constructed from one piece of 1/2ˮ Grade 80 steel, from tip to top brace, to add rigidity.
  • Fully gusseted tines with no cross member allowing better material penetration without compromising strength.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.

 

 


 

V40 SKELETON GRAPPLE

Two-cylinder independent grapple with an open sided design for hauling brush and logs.

  • Every tine is constructed from one piece of 1/2ˮ Grade 50 steel, from tip to top brace, to add rigidity.
  • Open bottom gives excellent visibility and allows dirt to fall through the 8″ tine spacing.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and hinge pins.
  • Teflon® coated bushings provide lubrication at jaw hinge.
  • Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

 

 


 

V50 SKELETON GRAPPLE

Two-cylinder independent grapple with an open sided design for hauling brush and logs.

  • Every tine is constructed from one piece of 1/2ˮ Grade 80 steel, from tip to top brace, to add rigidity.
  • Open bottom gives excellent visibility and allows dirt to fall through the 5 1/2ˮ tine spacing.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/14” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.

 

 


V50 TINE FORK GRAPPLE

Two-cylinder independent grapple designed to handle a variety of materials including manure, brush and debris.

  • Two 1/2ˮ thick vertical braces inside the frame for added strength.
  • High tensile strength removable, replaceable 2” diameter tines.
  • No cross member at tine tips allowing better material penetration.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • Known clearance issue on M-Series Bobcat® loaders when Cylinder Guards are installed and jaws are open. See FAQ for more info.
  • V60 Industrial Tine Fork Grapple also available.

 


 

V60 TINE FORK GRAPPLE

Two-cylinder independent grapple designed to handle a variety of materials including manure, brush and debris.

  • Four 1/2ˮ thick vertical braces inside the frame for added strength.
  • High tensile strength removable, replaceable 2 1/4” diameter tines.
  • No cross member at tine tips allowing better material penetration.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • Known clearance issue on M-Series Bobcat® loaders when Cylinder Guards are installed and jaws are open.
  • Machine specific hydraulic package to completely protect hose routing.
  • Known clearance issue on M-Series Bobcat® loaders when Cylinder Guards are installed and jaws are open. See FAQ for more info.

 


 

ANGLE BROOM

Powerful, direct drive motor clears dirt and snow in no time.

  • Direct drive design with replaceable drive components allowing forward and reverse operation.
  • Centering swing linkage better centers broom in front of loader when angled.
  • Heavy-duty stands flip up for storage. No pins required.
  • Easy exchange of wafers; no disconnecting of hydraulic hoses required.
  • Standard with 32″ diameter poly/wire wafers.
  • Standard 2″ diameter bearings.

 

 

 


 

PICK-UP BROOM

The broom efficiently sweeps dirt into the attached bucket, which is then easily emptied for effortless cleanup.

  • Direct drive design with replaceable drive components allowing forward and reverse operation.
  • Motor is guarded while allowing easy access for maintenance.
  • Heavy-duty hood frame adjusts to account for bristle wear by utilizing pins with multiple holes.
  • Reinforced bucket, similar to the V50 Dirt Bucket, results in long term performance.
  • Quick-tach height ensures the back of the bucket does not drag on the ground.
  • Easy exchange of wafers; no disconnecting of hydraulic hoses required.

 


 

TRENCHER

Designed to quickly and reliably dig trenches 36, 48, or 60 inches deep.

  • Direct drive Eaton® motor reduces downtime, no chains or belts. Standard flow and high flow motor options available.
  • Standard manual side-shift allows operator to dig near structures and other objects.
  • Adjustable and removable auger clears loose soil from the trenching area.
  • Standard crumber designed to keep the trench bottom clean and smooth.
  • Chain also rotates in reverse to expel obstructions and chain tension can be quickly adjusted.
  • Multiple chain configurations available for trenching in soft, hard, rocky, or frozen ground to get the job done quicker.
  • Multiple digging depths and chain widths available. See chart below.

 


 

POWER RAKE

Grade, rake and remove debris all with one attachment.

  • Direct drive Eaton® motor reduces downtime and is guarded from damage.
  • Floating design keeps the rake level for a smooth, even finish.
  • Bi-directional drum works the soil in both directions for quick seedbed preparation.
  • Manually angle the rake 25 degrees in either direction. Hydraulic Angle option available.
  • Standard carbide tip teeth for long life in many soil conditions.
  • Standard removable end plates help contain raked debris.
  • Solid urethane filled tires eliminate costly interruptions from flats.

 

 


 

DOZER BLADE – 6 WAY

Six-way dozer blade with heavy-duty frame, 3/8″ thick moldboard and adjustable skid shoes.

  • Two-cylinder hydraulic angle and one-cylinder hydraulic tilt utilizing one electric valve and one loader valve.
  • Corrosion, dent and flake resistant NitroSteel® cylinder rods made in the USA.
  • 2 1/8” hinge and oscillation pins, replaceable Teflon® coated bushings provide lubrication at all pivot locations.
  • 5/8” x 8” reversible, replaceable bolt-on wear edge.
  • NOTE: Does not have a trip edge or trip moldboard.

 

 


 

V50 AUGER DRIVE

Heavy-duty frame with hex output that supports auger bits up to 36” in diameter.

  • Planetary gear reduction assures consistent high torque output and long lifetime usage.
  • Parker® motor with hydraulic pressure relief valve.
  • 2” hex output providing stronger, more durable interface.

 

 

 

 

 


 

AUGER BITS

Auger bits from 6” to 36” in diameter to satisfy a variety of needs.

STANDARD (SAV) & TREE BITS (TAV)

  • For light to moderate ground conditions.
  • One piece fabricated steel boring head.
  • Double flighting with replaceable bolt-on teeth.
  • 4′ overall length with 2″ hex collar input.
  • Tree bits are smaller at the bottom to better keep trees in place while planting.
  • Variety of tooth options available.
  • Auger extensions and adapters available.

ROCK BITS (RAV)

  • For solid and fracturable rock, compacted soils, frozen ground, asphalt and concrete.
  • Cast steel boring head.
  • Single flighting with replaceable bullet teeth.
  • 4′ overall length with 2″ hex collar input.
  • Standard with Rotating Bullet Teeth and CDR Rock Pilot.

 

V50 MULTI-PURPOSE BUCKET (4-IN-1)

Multiple functions in one attachment to save time and money.

  • Functions include dozing, clamming, leveling, and bottom dumping.
  • Large 33” opening for easier, more efficient operation.
  • Design provides effective dozing, while maintaining maximum visibility.
  • ¾” x 6” weld on edge on front of bucket accepts optional edges.
  • Corrosion, dent and flake resistant NitroSteel® cylinder rods made in the USA. Cylinder Guards standard.
  • V60 Multi-Purpose Bucket also available.
  • Commonly called a 4-in-1 bucket.

 

 


 

V60 MULTI-PURPOSE BUCKET (4-IN-1)

Multiple functions in one attachment to save time and money. Stronger than the V50 Multi-Purpose Bucket.

  • Functions include dozing, clamming, leveling, and bottom dumping.
  • Large 33” opening for easier, more efficient operation.
  • Design provides effective dozing, while maintaining maximum visibility.
  • HMPV models have 1/4″ shell, 1-2 extra wear bars underneath, additional bracing, 1/2″ hinge structure and reinforcement at rear corners of dozer and quick-tach plate.
  • ¾” x 6” weld-on edge on front of bucket accepts optional edges.
  • Corrosion, dent and flake resistant NitroSteel® cylinder rods made in the USA. Cylinder Guards standard.
  • Commonly called a 4 in 1 bucket.

 


 

V50 SKELETON ROCK BUCKET

Designed to pick rocks and leave dirt and debris behind.

  • Open bottom and back gives excellent visibility and allows dirt to fall through the 3″ tine spacing.
  • Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging.
  • Every tine is constructed of one piece of steel, from tip to top cross member, to add rigidity.
  • Fully gusseted tine tips to strengthen tines and limit bending.
  • 3/8” Grade 80 steel for added strength and durability.
  • Additional uses include digging roots from thick brush, clearing overgrown fence lines and efficient back-dragging.
  • Deeper and taller than the V40 Skeleton Rock Bucket to increase capacity and leverage.
  • V40 Skeleton Rock Bucket with Grade 50 steel construction available.
  • V60 Heavy-Duty Skeleton Rock Bucket with 1/2″ steel construction and 4″ tine spacing available.

 


 

V60 SKELETON ROCK BUCKET

All the benefits of the V50 Skeleton Rock Bucket, but ½” steel construction makes it stronger.

  • Open bottom and back gives excellent visibility and allows dirt to fall through the 4″ tine spacing.
  • Raised ridge located at center of tines (rock dam) and notch near tips secure rocks while digging.
  • Every tine is constructed of one piece of steel, from tip to top brace, to add rigidity.
  • Fully gusseted tine tips to strengthen tines and limit bending.
  • Additional uses include digging roots from thick brush, clearing overgrown fence lines and efficient back-dragging.
  • V50 Skeleton Rock Bucket with 3/8″ steel construction and 3″ tine spacing available.

 


 

V30 COMPACT TRACTOR RAIL PALLET FORK

Pallet fork built for compact tractors.

  • Angled mount plate and high visibility back rest flush with tines.
  • 3/8” Grade 50 rail and 1/4” Grade 50 back rest.
  • Adjustable, ITA Class II forged tines with 2,200 lb lift capacity.

 

 

 

 

 


 

V50 RAIL PALLET FORK

Optimized for skid steer loader use with angled mount plate and high visibility brickguard flush with tines.

  • 3/8” Grade 80 rail and 3/16” Grade 50 brickguard.
  • Standard with adjustable, ITA Class II forged tines. See table below for capacity.
  • Bolt-on step allows safer operator entry and exit.
  • V60 Heavy Rail Pallet Fork also available.

 

 

 

 


 

V60 RAIL PALLET FORK

Optimized for skid loader use with angled mount plate and high visibility brickguard flush with tines.

  • 1/2” Grade 50 beveled rail and 1/4” Grade 50 brickguard makes it stronger than the V50 Rail Pallet Fork.
  • Standard with adjustable, ITA Class II forged tines. See table below for capacity.
  • Bolt-on step allows safer operator entry and exit.

 

 

 

 


 

V40 LOW PROFILE DIRT BUCKET

Skid steer dirt bucket with a low profile design and extended bottom for better visibility of cutting edge.

  • 3/16″ shell and side plates made from Grade 50 steel plate.
  • 1/2″ x 3ˮ structural wear bars underneath for added rigidity and life-span.
  • ¾” x 6″ weld-on cutting edge with holes to accept optional bolt-on or serrated bolt-on edge. See the “Options” tab for bucket edge options.
  • V50 Low Profile Dirt Bucket also available.

 

 

 


 

V50 LOW PROFILE DIRT BUCKET

Skid steer dirt bucket with Grade 50 steel construction and a low profile and extended bottom for better visibility of cutting edge.

  • Shell thickness differs between models; see chart below.
  • 1/2″ x 4ˮ structural wear bars underneath for added rigidity and life-span.
  • ¾” x 6″ weld-on cutting edge with holes to accept optional bolt-on or serrated bolt-on edge. See the “Options” tab for bucket edge options.
  • V60 Dirt Bucket available with 1/4″ steel construction.

 

 

 


 

V60 LOW PROFILE DIRT BUCKET

Heavy-duty skid steer dirt bucket with 1/4″ Grade 50 steel construction and a low profile and extended bottom for better visibility of the cutting edge.

  • Stronger than the V50 Low Profile Dirt Bucket with heavier top bracing, extra wear bars underneath and an extra interior brace plate.
  • ¾” x 6″ weld-on cutting edge with holes to accept optional bolt-on or serrated bolt-on edge. See the “Options” tab for bucket edge options.
  • Pictured with optional Bolt-on Edge.

 

 

 


 

V50 UTILITY BUCKET

General purpose bucket suited for dense and bulk materials.

  • ¾” x 6” weld-on edge with holes for optional edges.
  • V60 Utility Bucket also available.

 

 

 

 

 

 


 

V60 UTILITY BUCKET

Heavily constructed general-purpose bucket suited for dense and bulk materials.

  • Features heavy duty top bracing, up to 5 wear bars underneath, and interior brace plates to add rigidity.
  • 3/4” x 6” weld-on edge with holes for optional edges.
  • Bucket shown with optional bolt-on edge.