Pallet Folks

V60 TWO-CYLINDER PIPE PALLET FORK GRAPPLE

Two-cylinder independent clamp arms open to near vertical for handling palleted material.

  • 54ˮ wide frame keeps long material stable.
  • 48” or 60” Cascade® ITA Class II forged tines.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder and hinge pins.
  • Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

 

 

 

 

V60 FOUR-CYLINDER PIPE PALLET FORK GRAPPLE

Four-cylinder design applies consistent pressure to secure long pipe over uneven terrain.

  • Functions by main arms moving first while smaller, secondary arms move after main arm cylinders experience resistance.
  • 54ˮ wide frame keeps long material stable.
  • 48” Cascade® ITA Class II forged tines rated at 6200 pounds.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder and hinge pins.
  • Machine specific hydraulic package to completely protect hose routing.
  • Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

 

 

V30 COMPACT TRACTOR RAIL PALLET FORK

Pallet fork built for compact tractors.

  • Angled mount plate and high visibility back rest flush with tines.
  • 3/8” Grade 50 rail and 1/4” Grade 50 back rest.
  • Adjustable, ITA Class II forged tines with 2,200 lb lift capacity.

 

 

 

 

 

 

V50 WALK-THROUGH PALLET FORK

Walk-through design allows quick cab access.

  • 3⁄8ˮ Grade 80 rail and 1⁄4ˮ x 2ˮ flat steel backrest.
  • Optimized for skid loader use with angled mount plate and high visibility back rest flush with tines.
  • Standard with adjustable, ITA Class II forged tines. See table below for capacity.
  • Comes with one step and hardware to install on either side.
  • Same frame for USA and Global Tines.

 

 

 

 

V50 RAIL PALLET FORK

Optimized for skid steer loader use with angled mount plate and high visibility brickguard flush with tines.

  • 3/8” Grade 80 rail and 3/16” Grade 50 brickguard.
  • Standard with adjustable, ITA Class II forged tines. See table below for capacity.
  • Bolt-on step allows safer operator entry and exit.
  • V60 Heavy Rail Pallet Fork also available.

 

 

 

 

 

V60 RAIL PALLET FORK

Optimized for skid loader use with angled mount plate and high visibility brickguard flush with tines.

  • 1/2” Grade 50 beveled rail and 1/4” Grade 50 brickguard makes it stronger than the V50 Rail Pallet Fork.
  • Standard with adjustable, ITA Class II forged tines. See table below for capacity.
  • Bolt-on step allows safer operator entry and exit.