Tufline Discs

Tractor Mount Lifts

We have three point lift disc models to fit tractors from 12-100 horsepower.

TGE Series Tandem Lift Disc Harrows

Tufline’s TGE Series Lift Tandem Disc are designed for small tractors up to a maximum 28 horsepower. They have a Category 1 hitch and are quick hitch compatible. The mainframe is constructed of heavy duty 2” square tube. The gangs have a 1” square high strength axle with re-greasable friction or flange mounted ball bearings. All units have adjustable gang angles. The units have 7 1/2” blade spacing with 16” or 18” notched blades standard. Plain blades optional.

• Designed for 15 to 28 Horsepower Tractors
• 4’ & 5’ 6” Cutting Widths
• 2” Square Tube Mainframe
• Adjustable Gang Cutting Angles
• 7 1/2” Blade Spacing
• Regreasable Friction Bearings or Flanged Mounted Ball Bearings
• 16” or 18” Notched Blades Standard
• Plain Blades Optional
• Category 1 Hitch I-Match Compatible

TME Series Economy Tandem Lift Disc Harrows

Our economy model tandem lift disc harrow designed for tractors from 25 to 35 horsepower. The TME offers the same adjustable cutting angles and rugged gang construction of our other small disc in a lighter frame for economy.

• Designed for 20 to 35 Horsepower Tractors
• Available in 5’ 6” & 6’ 6” Cutting Widths
• Pin Type Angle Adjustment
• 7 1/2” or 9” Blade Spacing
• 1” Axle
• Ball Bearing Models
• 18” Notched Blade Standard
• Plain Blades Optional
• Category 1 Hitch I-Match Compatible

THE Series Tandem Lift Disc Harrows

Designed for 25 to 45 horsepower tractors, the THE Series are built of 3” heavy duty square tube and offer flangette or pillow block ball bearings. They have a Category 1 hitch and are quick hitch compatible. The gangs have 1” or 1 1/8” square high strength axles. All units have adjustable gang angles. The units have 7 1/2”, 9”, or combination blade spacing with 18” or 20” notched blades standard. Plain blades optional.

• Designed for 25 to 45 Horsepower Tractors
• Available in 5’ 6”, 6’ 4”, and 6’ 8” Cutting Widths
• 3” Square Tubing Frame
• Flangette Ball Bearings or Pillow Block Ball Bearings
• 18” Notched Blades on 1” Axle Models
• 18” or 20” Notched Blades on 1 1/8” Models
• Plain Blades Optional
• Category 1 Hitch I-Match Compatible

TH & TH/BF Series Tandem Lift Disc Harrows

Designed for 35 to 55 horsepower tractors, the TH Series are built of 3” heavy duty square tube and offer flangette or pillow block ball bearings. They have a Category 1 hitch and are quick hitch compatible. The gangs have 1 1/8” square high strength axles. Each unit is equipped with lever controlled adjustable gang angles. The units have 7 1/2”, 9” or combination blade spacing with 18”, 20” or 22” notched blades standard. Plain blades optional.

• Designed for 35 to 55 Horsepower Tractors
• Available in 6’ 4”, 6’ 8”, and 8’ Cutting Widths
• Notched Blades Standard/Plain Blades Optional
• 3” Heavy Square Tube Mainframe
• Lever Adjust Gang Cutting Angles
• Pillow Block or Flange Mounted Ball Bearings
• Category 1 Hitch I-Match Compatible
• 1 1/8″ High Strength Axle

THF Series Tandem Lift Disc Harrows

Designed for 35 to 55 horsepower tractors, these units are built of 3” high yield square tube hinged frame and offer flange or pillow block ball bearings. They have a Category 1 hitch and are quick hitch compatible. The gangs have 1 1/8” square high strength axles. Each unit is equipped with lever controlled adjustable gang angles. The units have 7 1/2”, 9” or combination blade spacing with 18”, 20” or 22” notched blades standard. Plain blades optional.

• Designed for 35 to 55 Horsepower Tractors
• Available in 6’ 4”, 6’ 8”, and 8’ Cutting Widths
• Notched Blades Standard
• Plain Blades Optional
• 3” Square High Yield Tube Frame
• Lever Adjust Gang Cutting Angles
• Category 1 Hitch I-Match Compatible
• 1 1/8” Square Axle

TL43 Series Tandem Lift Disc Harrows

Designed for 45 to 80 horsepower tractors, these units are built of 4” x 3” high yield square tube and feature triple sealed ball bearings. They have a Category 1 and 2 hitch and are quick hitch compatible. The gangs have 1 1/8” square high strength axles with heavy tube gang hangers. Each unit is equipped with adjustable gang angles. The units have 7 1/2”, 9” or combination blade spacing with 20” or 22” notched blades standard. Plain blades optional.

• Designed for 45 to 80 Horsepower Tractors
• Available in 6’4”, 6’ 8”, or 8’ Cutting Widths
• 4” x 3” Tube Frame
• Gang Angle Adjustable
• Triple Sealed Ball Bearings
• Heavy Tube Gang Hanger
• 1 1/8” Gang Axles
• Category 1 & 2 Hitch I-Match Compatible

T4X Series Heavy Tandem Lift Disc Harrows

Designed for 50 to 80 horsepower tractors, these units are built of 4” high yield square tube and feature triple sealed ball bearings. The T4X series is equipped with a heavy duty Category 2 hitch that is quick hitch compatible. The gangs have 1 1/8” square high strength axles with heavy tube gang hangers. Each unit is equipped with adjustable gang angles. The units have 7 1/2”, 9” or combination blade spacing with 20” or 22” notched blades standard. Plain blades optional.

• Designed for 50 to 80 Horsepower Tractors
• Available in 8’, 9’ 6” Cutting Widths
• 4” Square Tube Frame
• Gang Angle Adjustable
• Notched Blades Standard/Plain Blades Optional
• Triple Sealed Ball Bearings
• Heavy Tube Gang Hangers
• 1 1/8” Gang Axles
• Category 2 Hitch I-Match Compatible

HL Series Heavy Tandem Lift Disc Harrows

Designed for 60 to 100 horsepower tractors, these units are built of 5” x 3” high yield tube steel and feature trunion triple sealed ball bearings. They have Category 2 compatible hitches. The gangs have 1 1/2” square high strength axles. Each unit is equipped with adjustable gang angles. The units have 9” or 10 1/2” blade spacing with 22” or 24” notched blades standard. Plain blades optional.

• Designed for 60 to 100 horsepower tractors
• Available in 6’ 4”, 8’ , 9’ 6”, and 10’ 6” Cutting Widths
• 5” x 3” Tube frame
• Gang Angle Adjustable
• Notched Blades Standard
• Plain Blades Optional
• Trunion Triple Sealed Ball Bearings
• Heavy Tube Gang Hangers
• 1 1/2” High Strength Gang Axles
• Category 2 Hitch

GID Series 3-point Heavy Specialty Lift Disc Harrows

The GID Series Specialty Disc is specifically designed for applications where narrow, heavy discing is needed. It is ideal for vineyards and fruit orchards from apples to blueberries. The gangs are all independently adjustable for complete control when deep plowing to bury vegetation or light tilling to smooth and create a good seed bed for cover crop germination. Gangs can also be set to push or pull dirt as needed when discing after hoe plowing. The heavy duty cut buries and compresses cover crops to create a biomass that is beneficial to a well balanced vineyard. Orchard operators will be pleased with the ease of tilling around trees.

Built with a heavy 6” x 4” square tube drawbar and 4” square tube frame. Axles are 1 1/2” square high strength steel to withstand tough rocky soil found in many vineyard and orchard operations. Triple sealed ball bearings. The four gangs are independently adjustable to control amount and direction of soil distribution. Each gangs width from the center can be adjusted independently.

• Designed for 50 to 85 Horsepower Tractors
• 4” Square Tube Frame
• Notched Blades Standard/Plain Blades Optional
• 1 1/2” Square High Strength Gang Axles
• Blade Scrapers Optional
• Category 1 & 2 Hitch
• CLASS 70-KD/150-ASSEBLED

TLO Series Offset Lift Disc Harrows

Tufline offers a full range of Tandem Lift Disc Harrows. Each is manufactured with heavy duty mainframes designed for rugged conditions and offer a full range of options from different blade sizes and spacing to scrapers and outrigger kits. Tufline offers two series of Offset Lift Disc Harrows. The TLO Series offers quality manufacturing and flexible options to match almost any deep tillage requirement.

• Designed for 25 to 75 horsepower tractors
• 3” Square Tube Frame
• Pin Adjusting Gang Angles
• Front to Rear Leveling for Side Draft Control
• Notched Blades Standard/Plain Blades Optional
• 1 1/8” Square High Strength Gang Axles
• Blade Scrapers Optional
• Category 1 Hitch on 4’ 6” models
• Category 1 & 2 Hitch on 5’ 3” to 8’ 4” models

LO40 Series Heavy Offset Lift Disc Harrows

Tufline offers a full range of Offset Lift Disc Harrows. Each is manufactured with heavy duty mainframes designed for rugged conditions and offer a full range of options from different blade sizes and spacing to scrapers and outrigger kits. Tufline offers two series of Offset Lift Disc Harrows. The LO40 Series offers quality manufacturing and flexible options to match almost any deep tillage requirement.

• Designed for 60 to 120 Horsepower Tractors
• Available in 6’ 2” to 9’ Cutting Widths
• 4” Square Tubular Frame
• Adjustable Gang Angle
• 1 1/2” RC Square Cold Drawn Axle
• Blade Scrapers Optional
• Category 2 and 3 Hitch Standard

Pull Type Wheel Discs

We offer wheel discs to fit tractors from 35-160 horsepower. Our wheel discs are built with heavy duty mainframes designed for rugged conditions and offer a full range of options from different blades and spacing to heavy scrapers and shock flex hangers.

TW5 Series Tandem Wheel Disc Harrows

8’ – 9’ 6” Models

Tufline’s TW5 Series Tandem Wheel Disc are designed for 35 to 65 horsepower tractors. The mainframe is constructed of heavy duty 3” square tube with tube type gang hangers. The gangs have a 1 1/8” square hi-strength axles with triple sealed ball bearings. All units have a front to rear leveling system and depth control. Safety chain and mounted tongue jack are standard. The units are available in 9” or 7 1/2” or combination blade spacing. 20” or 22” notched blades are standard with plain blades optional. Hydraulic cylinders, hoses, and tires are standard equipment.

10’ 6” – 15’ Models

Designed for 50 to 85 horsepower tractors, these wider models have 4” X 3” and 5” X 3” hi-yield tube frames with tube type gang hangers. The gangs have a 1 1/8” square hi-strength axles with triple sealed ball bearings. All units have a front to rear leveling system and depth control. Safety chain and mounted tongue jack are standard. The units are available in 9” or 7 1/2” or combination blade spacing. 20” or 22” notched blades are standard with plain blades optional. Hydraulic cylinders, hoses, and tires are standard equipment.

Optional Equipment

Optional equipment is available for all TW5 Series
Tandem Wheel Disc. They include:
• Heavy Duty Blade Scrapers
• Outrigger Assembly with 16” or 18” Plain Disc Blades
• Balk Breaker Assembly with Point
• Dual Wheel Kit for 10’6” to 13’4’ models
• SMV Sign and Bracket
• Regreasable Bearings

TW6 Series Tandem Wheel Disc Harrows

TW6 Series Tandem Disc

Tufline’s TW6 Series Tandem Wheel Disc are designed for 60 to 160 horsepower tractors. The mainframe is constructed of heavy duty 6” x 4” and 4” x 4” square tube with tube type gang hangers. The gangs have a 1 1/2” square high strength gang axles with triple sealed ball bearings. All units have a front to rear leveling system and depth control. The units are available in 9” or 10 1/2” blade spacing. 22” or 24” notched blades are standard with plain blades optional. Dual wheels are standard. Safety chain and mounted tongue jack are standard. Hydraulic cylinder, hoses, and tires are also standard equipment.

• Designed for 60 to 160 Horsepower Tractors
• Heavy Duty 6” x 4” and 4” x 4” Mainframe
• 1 1/2” High Strength Gang Axles
• Triple Sealed Ball Bearings
• 9” or 10 1/2” Blade Spacing, 22” or 24” Blades

TW6 Series Tandem Disc with Shock Flex Hangers

Tufline’s TW6 Series Tandem Wheel Disc harrow are available with Shock Flex Gang Hangers for rugged terrain and are designed for 65 to 140 horsepower tractors.

Optional Equipment
Optional equipment is available for all TW6 Series Tandem Wheel Disc and the TW6 Series with Shock Flex Gang Hangers. They include:
• Heavy Duty Blade Scrapers
• Outrigger Assembly with or 18” Plain Disc Blades
• Balk Breaker Assembly with Point
• SMV Sign and Bracket
• Regreasable Bearings

38 Series Offset Wheel Disc Harrows

Tufline’s 38 Series Offset Disc Harrows are designed for 50 to 80 horsepower tractors. The mainframe is constructed of heavy duty 4” square tube and 5” x 3” square tube gang beams. The gangs have a 1 1/2” RC square gang axles with triple sealed ball bearings. All units have a front to rear spring loaded leveling system and a tongue and yoke system for side draft control. Gang angle is adjustable and the gangs are available with tubular or shock flex gang hangers. 22” or 24” notched blades are standard with plain blades optional. Safety chain and mounted tongue jack are standard. Hydraulic cylinder, hoses, and tires are also standard equipment.

9” Blade Spacing Models

• Designed for 50 to 80 Horsepower Tractors
• 4” Square Tube Mainframe
• 5” x 3” Square Gang Beams
• 1 1/2” RC Steel Axles
• Triple Sealed Ball Bearings
• Depth Control System
• Front to Rear Spring Loaded Leveling System
• Gang Angle Adjustable
• Tubular or Shock Flex Gang Hangers

10 1/2” Blade Spacing Models

• Designed for 50 to 90 Horsepower Tractors
• 4” Square Tube Mainframe
• 5” x 3” Square Gang Beams
• 1 1/2” RC Steel Axles
• Triple Sealed Ball Bearings
• Depth Control System
• Front to Rear Spring Loaded Leveling System
• Gang Angle Adjustable
• Tubular or Shock Flex Gang Hangers

42 Series Offset Wheel Disc Harrows

Tufline’s 42 Series Heavy Offset Disc Harrows are designed for 60 to 120 horsepower tractors. The mainframe is constructed of heavy duty 6” x 4” square tube and 6” x 4” square tube gang beams. The gangs have 1 1/2” RC square cold drawn gang axles with sealed ball bearings. All units have a front to rear spring loaded leveling system and a tongue and yoke system for side draft control. The gangs are adjusted by turnbuckles and are available with tubular or shock flex hangers. 24” or 26” notched blades are standard with plain blades optional. Dual wheels, safety chain and mounted tongue jack are standard. Hydraulic cylinders, hoses, and tires are also standard equipment.

6’8″-13’6″

• 9″ Spacing Models
• Designed for 60 to 120 Horsepower Tractors
• 6” x 4” Mainframe and 6” x 4” Gang Beams
• 1 1/2” RC Steel Axles, Triple Sealed Ball Bearings
• Depth Control System, Standard Dual Wheels
• Gangs Adjustable by Turnbuckles
• Tubular Gang Hangers or Shock Flex Hangers

7’8″-13’6″

• 10 1/2″ Spacing Models
• Designed for 65 to 120 Horsepower Tractors
• 6” x 4” Mainframe and 6” x 4” Gang Beams
• 1 1/2” RC Steel Axles, Triple Sealed Ball Bearings
• Depth Control System, Standard Dual Wheels
• Tongue & Yoke System for Side Draft Control
• Gangs Adjustable by Turnbuckles
• Tubular Gang Hangers or Shock Flex Hangers

63 Series Heavy Offset Wheel Disc Harrows

*Undergoing Redesign for 2015

Tufline’s 63 Series Heavy Offset Disc Harrows are designed for 120 to 200 horsepower tractors. The mainframe is constructed of heavy duty 7” x 5” square tube and 7” x 5” square tube gang beams. The gangs have a 1 1/2” RC square cold drawn gang axles with sealed ball bearings. All units have a front to rear spring loaded leveling system and a tongue and yoke system for side draft control. The gangs are adjusted by turnbuckles and available with tubular or shock flex hangers. 24” or 26” notched blades are standard with plain blades optional. Dual wheels, safety chain and mounted tongue jack are standard. Hydraulic cylinders, hoses, and tires are also standard equipment.

• Designed for 120 to 200 Horsepower Tractors
• 7” x 5” Mainframe and 7” x 5” Tubing Gang Beams
• 1 1/2” RC Square Cold Drawn Axles, Sealed Ball Bearings
• Front to Rear Leveling System
• Tongue & Yoke System for Side Draft Control
• Angle Adjustable by Turnbuckles
• 8” Wheel Rims, 24”, or 26” Disc Blades