Buckets

V50 MULTI-PURPOSE BUCKET (4-IN-1)

Multiple functions in one attachment to save time and money.

Functions include dozing, clamming, leveling, and bottom dumping.
Large 33” opening for easier, more efficient operation.
Design provides effective dozing, while maintaining maximum visibility.
¾” x 6” weld on edge on front of bucket accepts optional edges.
Corrosion, dent and flake resistant NitroSteel® cylinder rods made in the USA. Cylinder Guards standard.
V60 Multi-Purpose Bucket also available.
Commonly called a 4-in-1 bucket.

V60 MULTI-PURPOSE BUCKET (4-IN-1)

Multiple functions in one attachment to save time and money. Stronger than the V50 Multi-Purpose Bucket.

Functions include dozing, clamming, leveling, and bottom dumping.
Large 33” opening for easier, more efficient operation.
Design provides effective dozing, while maintaining maximum visibility.
HMPV models have 1/4″ shell, 1-2 extra wear bars underneath, additional bracing, 1/2″ hinge structure and reinforcement at rear corners of dozer and quick-tach plate.
¾” x 6” weld-on edge on front of bucket accepts optional edges.
Corrosion, dent and flake resistant NitroSteel® cylinder rods made in the USA. Cylinder Guards standard.
Commonly called a 4 in 1 bucket.

V30 COMPACT TRACTOR SKELETON ROCK BUCKET

Designed to pick rocks while leaving dirt and debris behind.

Open bottom and back gives excellent visibility and allows dirt to fall through the 2.9″ tine spacing.
Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging.
Every tine is constructed of one piece of steel, from tip to top brace, to add rigidity.
Fully gusseted tine tips to strengthen tines and limit bending.
Lightweight, yet durable construction perfect for compact tractors and small skid loaders.
Additional uses include digging roots from thick brush, clearing overgrown fence lines and efficient back-dragging.

V40 SKELETON ROCK BUCKET

Designed to pick rocks while leaving dirt and debris behind.

Open bottom and back gives excellent visibility and allows dirt to fall through the 2.9″ tine spacing.
Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging.
Every other tine is constructed of one piece of steel, from tip to top brace, to add rigidity.
Fully gusseted tine tips to strengthen tines and limit bending.
3/8″ Grade 50 steel for added strength and durability.
Additional uses include digging roots from thick brush and efficient back-dragging.
V50 Skeleton Rock Bucket with Grade 80 steel construction and 3″ tine spacing available.

V50 SKELETON ROCK BUCKET

Designed to pick rocks and leave dirt and debris behind.

Open bottom and back gives excellent visibility and allows dirt to fall through the 3″ tine spacing.
Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging.
Every tine is constructed of one piece of steel, from tip to top cross member, to add rigidity.
Fully gusseted tine tips to strengthen tines and limit bending.
3/8” Grade 80 steel for added strength and durability.
Additional uses include digging roots from thick brush, clearing overgrown fence lines and efficient back-dragging.
Deeper and taller than the V40 Skeleton Rock Bucket to increase capacity and leverage.
V40 Skeleton Rock Bucket with Grade 50 steel construction available.
V60 Heavy-Duty Skeleton Rock Bucket with 1/2″ steel construction and 4″ tine spacing available.

V60 SKELETON ROCK BUCKET

All the benefits of the V50 Skeleton Rock Bucket, but ½” steel construction makes it stronger.

Open bottom and back gives excellent visibility and allows dirt to fall through the 4″ tine spacing.
Raised ridge located at center of tines (rock dam) and notch near tips secure rocks while digging.
Every tine is constructed of one piece of steel, from tip to top brace, to add rigidity.
Fully gusseted tine tips to strengthen tines and limit bending.
Additional uses include digging roots from thick brush, clearing overgrown fence lines and efficient back-dragging.
V50 Skeleton Rock Bucket with 3/8″ steel construction and 3″ tine spacing available.

MANURE SLURRY BUCKET

High-strength steel construction and replaceable wear edges.

Top formed profile to limit spillage and rolled inside profile for easier clean out.
60 degree back angle to better hold slurry material inside the bucket.
¾” x 6” weld-on edge with holes for optional bolt-on edge.
Reversible, replaceable bolt-on side wear edges.

HIGH DUMP BUCKET

Increases lift and reach for easier loading.

Increases vertical lift by 44” and horizontal reach by 13” (approximately).
Ideal for loading feed mixers and trucks. Windows in bucket for increased visibility.
Corrosion, dent and flake resistant NitroSteel® cylinder rods made in the USA.
3/4” x 6” weld-on edge with holes for optional edges.
Machine specific hydraulic package available.
Commonly called a rollout bucket.

V40 SNOW / LIGHT MATERIAL BUCKET

High capacity design allows for large volumes of snow or light material to be hauled per load.

High-strength, ¾” x 6” weld-on edge with holes for optional edges.
NOTE: SLHV96 has two 3/8″ thick vertical braces inside the bucket. Similar to the V50 Snow Bucket.
V60 Snow Bucket also available.

V50 SNOW / LIGHT MATERIAL BUCKET

Deeper, taller, and stronger than the V40 Snow/Light Material Bucket.

High capacity design allows large volumes of light material to be hauled per load.
Windows in bucket to increase cutting edge visibility.
Two 3/8” thick vertical braces and large upper cross member inside the bucket make for reinforcement.
High-strength, 3/4” x 6” weld-on edge with pre-drilled holes for optional edges.
V60 Snow Bucket also available.

V60 SNOW / LIGHT MATERIAL BUCKET

40.5” tall back and extended bottom allows large volumes of light material to be hauled per load.

¼” thick bucket shell and side plates for long term performance.
Windows in bucket for increased visibility.
Two vertical, 1/2” thick braces and large upper cross member for reinforcement.
High-strength, 3/4” x 6” weld-on edge with pre-drilled holes for optional edges.

V40 LOW PROFILE DIRT BUCKET

Skid steer dirt bucket with a low profile design and extended bottom for better visibility of cutting edge.

3/16″ shell and side plates made from Grade 50 steel plate.
1/2″ x 3ˮ structural wear bars underneath for added rigidity and life-span.
¾” x 6″ weld-on cutting edge with holes to accept optional bolt-on or serrated bolt-on edge. See the “Options” tab for bucket edge options.
V50 Low Profile Dirt Bucket also available.

V50 LOW PROFILE DIRT BUCKET

Skid steer dirt bucket with Grade 50 steel construction and a low profile and extended bottom for better visibility of cutting edge.

Shell thickness differs between models; see chart below.
1/2″ x 4ˮ structural wear bars underneath for added rigidity and life-span.
¾” x 6″ weld-on cutting edge with holes to accept optional bolt-on or serrated bolt-on edge. See the “Options” tab for bucket edge options.
V60 Dirt Bucket available with 1/4″ steel construction.

V60 LOW PROFILE DIRT BUCKET

Heavy-duty skid steer dirt bucket with 1/4″ Grade 50 steel construction and a low profile and extended bottom for better visibility of the cutting edge.

Stronger than the V50 Low Profile Dirt Bucket with heavier top bracing, extra wear bars underneath and an extra interior brace plate.
¾” x 6″ weld-on cutting edge with holes to accept optional bolt-on or serrated bolt-on edge. See the “Options” tab for bucket edge options.
Pictured with optional Bolt-on Edge.

V50 UTILITY BUCKET

General purpose bucket suited for dense and bulk materials.

¾” x 6” weld-on edge with holes for optional edges.
V60 Utility Bucket also available.

V60 UTILITY BUCKET

Heavily constructed general-purpose bucket suited for dense and bulk materials.

Features heavy duty top bracing, up to 5 wear bars underneath, and interior brace plates to add rigidity.
3/4” x 6” weld-on edge with holes for optional edges.
Bucket shown with optional bolt-on edge.