Grapples

V50 SCRAP GRAPPLE

Two-cylinder independent grapple with 1/4” Grade 50 solid bottom scoops up bulky material.

  • Two 1/2ˮ thick vertical braces inside bucket for added strength.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • 3/4″ x 6″ weld-on cutting edge with holes to accept optional edges.
  • Machine specific hydraulic package to completely protect hose routing.
  • V60 Scrap Grapple also available.

 

 

V30 COMPACT TRACTOR SKELETON ROCK GRAPPLE

Grapple and rock bucket hybrid with an open design for more than just picking rocks.

  • Open bottom allows dirt to fall through the 2.9″ tine spacing.
  • Every tine is constructed of one piece of steel, from tip to top cross member, to add rigidity.
  • Corrosion, dent and flake resistant NitroSteel® cylinder rod made in the USA.
  • Raised ridge in center of tines and notch near tips secure rocks while digging.
  • Fully gusseted tine tips to strengthen tines and limit bending.
  • 1” diameter greaseable grapple pins.
  • Light weight, yet durable construction perfect for compact tractors and small skid loaders.

 

 

 

V40 SKELETON ROCK GRAPPLE

Two-cylinder independent grapple with 3” tine spacing designed to pick rocks and debris and leave dirt behind.

  • Every other tine is constructed of one piece of steel, from tip to top brace, to add rigidity. Every tine is made from 3/8” Grade 50 steel.
  • Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging.
  • 2” bore, 8 3⁄8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and hinge pins.
  • Teflon® coated bushings provide lubrication at jaw hinge.
  • Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

 

 

V50 SKELETON ROCK GRAPPLE

Two-cylinder independent grapple with 3” tine spacing designed to pick rocks and debris and leave dirt behind.

  • Every tine is constructed from one piece of 3/8” Grade 80 steel, from tip to top brace, to add rigidity.
  • Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • Machine specific hydraulic package to completely protect hose routing.
  • V60 Skeleton Rock Grapple also available.

 

 

V60 SKELETON ROCK GRAPPLE

Two-cylinder independent grapple with 4” tine spacing designed to pick rocks and debris and leave dirt behind.

  • Every tine is constructed from one piece of 1/2ˮ Grade 80 steel, from tip to top brace, to add rigidity.
  • Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • Machine specific hydraulic package to protect hose routing.

 

 

V50 SKELETON TINE GRAPPLE

Two-cylinder independent grapple that reaches tine tips for fine work.

  • Every tine is constructed from one piece of 1/2ˮ Grade 80 steel, from tip to top brace, to add rigidity.
  • Fully gusseted tines with no cross member allowing better material penetration without compromising strength.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.

 

 

V40 SKELETON GRAPPLE

Two-cylinder independent grapple with an open sided design for hauling brush and logs.

  • Every tine is constructed from one piece of 1/2ˮ Grade 50 steel, from tip to top brace, to add rigidity.
  • Open bottom gives excellent visibility and allows dirt to fall through the 8″ tine spacing.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and hinge pins.
  • Teflon® coated bushings provide lubrication at jaw hinge.
  • Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

 

 

 

V50 SKELETON GRAPPLE

Two-cylinder independent grapple with an open sided design for hauling brush and logs.

  • Every tine is constructed from one piece of 1/2ˮ Grade 80 steel, from tip to top brace, to add rigidity.
  • Open bottom gives excellent visibility and allows dirt to fall through the 5 1/2ˮ tine spacing.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/14” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.

 

 

 

V60 ROOT RAKE GRAPPLE

Two-cylinder, single jaw grapple for digging, raking, piling and loading debris.

  • Unique design allows efficient forward and reverse operation to drag loose material into piles.
  • Heavy-duty jaw and rake tines constructed from 1/2″ Grade 80 steel.
  • 50.3” grapple jaw opening to haul large amounts of brush per load.
  • Series 23 replaceable cast teeth.
  • 2 1/2ˮ bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • Machine specific hydraulic package to completely protect hose routing.
  • Known clearance issue with RRG72 on Takeuchi track loaders and John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

 

V60 LARGE CAPACITY SKELETON GRAPPLE

Two-cylinder independent grapple opens over 5 feet for large jobs.

  • Heavy-duty 1/2″ Grade 80 steel tines and 1/2″ Grade 50 steel jaw tines.
  • Open back gives excellent visibility.
  • 2 1/2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 9/16” diameter hinge pins and 1 1/4” cylinder pins.
  • Fully gusseted tine tips for added strength.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • Machine specific hydraulic package to completely protect hose routing.
  • Cylinder Guards standard.

 

 

V30 COMPACT TRACTOR UTILITY FORK GRAPPLE

A durable, versatile one-cylinder grapple with replaceable tines.

  • 1” diameter greaseable grapple pins.
  • Designed for easy cleanout and bulk material penetration.
  • Handles a variety of materials including manure, brush, and debris.
  • Corrosion, dent and flake resistant NitroSteel® cylinder rod made in the USA.
  • High tensile strength tines require no maintenance and are removable for easy replacement.
  • Light weight, yet durable construction perfect for compact tractors and small skid loaders.

 

 

 

 

V40 UTILITY FORK GRAPPLE

One-cylinder grapple designed to handle a variety of materials including manure, brush and debris.

  • High tensile strength removable, replaceable 1 3/4” diameter tines.
  • No cross member at tine tips allowing better material penetration.
  • 2” bore, 8 3/8” stroke cylinder featuring corrosion, dent and flake resistant NitroSteel® cylinder rod.
  • Greasable 1 1/4” diameter cylinder and hinge pins.
  • Teflon® coated bushings provide lubrication at jaw hinge.
  • Machine specific hydraulic package to completely protect hose routing.
  • Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

 

 

V50 TINE FORK GRAPPLE

Two-cylinder independent grapple designed to handle a variety of materials including manure, brush and debris.

  • Two 1/2ˮ thick vertical braces inside the frame for added strength.
  • High tensile strength removable, replaceable 2” diameter tines.
  • No cross member at tine tips allowing better material penetration.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • Known clearance issue on M-Series Bobcat® loaders when Cylinder Guards are installed and jaws are open. See FAQ for more info.
  • V60 Industrial Tine Fork Grapple also available.

 

 

V60 TINE FORK GRAPPLE

Two-cylinder independent grapple designed to handle a variety of materials including manure, brush and debris.

  • Four 1/2ˮ thick vertical braces inside the frame for added strength.
  • High tensile strength removable, replaceable 2 1/4” diameter tines.
  • No cross member at tine tips allowing better material penetration.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder pins and 1 9/16” diameter hinge pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • Known clearance issue on M-Series Bobcat® loaders when Cylinder Guards are installed and jaws are open.
  • Machine specific hydraulic package to completely protect hose routing.
  • Known clearance issue on M-Series Bobcat® loaders when Cylinder Guards are installed and jaws are open. See FAQ for more info.

 

 

V60 TWO-CYLINDER PIPE PALLET FORK GRAPPLE

Two-cylinder independent clamp arms open to near vertical for handling palleted material.

  • 54ˮ wide frame keeps long material stable.
  • 48” or 60” Cascade® ITA Class II forged tines.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder and hinge pins.
  • Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

 

 

 

 

 

 

V60 FOUR-CYLINDER PIPE PALLET FORK GRAPPLE

Four-cylinder design applies consistent pressure to secure long pipe over uneven terrain.

  • Functions by main arms moving first while smaller, secondary arms move after main arm cylinders experience resistance.
  • 54ˮ wide frame keeps long material stable.
  • 48” Cascade® ITA Class II forged tines rated at 6200 pounds.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 1/4” diameter cylinder and hinge pins.
  • Machine specific hydraulic package to completely protect hose routing.
  • Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).

 

 

BOLT-ON GRAPPLE

Makes turning a bucket into a grapple simple. No welding or cutting required.

  • Telescoping mount system fits various width and style buckets.
  • Corrosion, dent and flake resistant NitroSteel® cylinder rod made in the USA.
  • One-cylinder design with machine specific hydraulic package.

 

 

 

 

 

 

STUMP BUCKET GRAPPLE

A versatile grapple ideal for digging stumps and rocks, trenching and breaking up compacted soil.

  • Grapple jaw makes stump and rock removal easier and secures load for transport.
  • Tall sides provide capacity, while compact depth provides leverage to pry under stumps and rocks.
  • Corrosion, dent and flake resistant NitroSteel® cylinder rod made in the USA.­ Cylinder Guard standard.
  • Three flush mount shanks, with replaceable Series 23 cast teeth, welded to a 3/4” x 6” weld-on wear edge.
  • Bucket is reinforced on each side with three large gusset plates.
  • Stump Bucket without grapple also available.

 

 

 

BIG BALE GRAPPLE

Two-cylinder grapple with large jaw opening allows handling of big round bales, while curved tines penetrate bales with minimal damage.

  • Open bottom and back gives excellent visibility and allows debris to fall through.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 9/16” diameter hinge pins and 1 1/4” diameter cylinder pins.
  • Te on® coated bushings provide lubrication at all pivot locations.
  • Machine specific hydraulic package available.
  • Hay Bucket Grapple with a solid bottom also available.

 

 

 

HAY BUCKET GRAPPLE

Two-cylinder grapple with large jaw opening allows handling of big round bales, while curved tines penetrate bales with minimal damage.

  • Two-cylinder grapple with large jaw opening allows handling of big round bales, while curved tines penetrate bales with minimal damage.
  • 2” bore, 8 3/8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods.
  • Greasable 1 9/16” diameter hinge pins and 1 1/4” diameter cylinder pins.
  • Teflon® coated bushings provide lubrication at all pivot locations.
  • 3/4” x 6” weld-on cutting edge with holes to accept optional edges.
  • Machine specific hydraulic package available.
  • Big Bale Grapple with an open bottom also available.